Product Description

Product Description

Upsetting type rebar coupler is strong rebar parallel thread couplers which enlarge the rebar nominal diameters by cold forging and then do the thread cutting, after the thread cutting, the thread smaller diameter still larger than the rebar nominal diameter, so it is very strong connections, because of thread cutting, its threads are very smooth and it can be called easy installation rebar couplers and also it can have quick connection for rebar.

Product Details:


Parallel   Upsetting Rebar couplers (U type)

Used for Rebar:

HRB500/Grade 75/Kuwait 550/500B and so on with rebar yield strength   higher than 500MPa.

Raw Material:

40CR-yield strength 750Mpa, Tensile strength: 860MPa




By bags and pallets packing, or wooden case packing as required (25KG   smaller packing, 1700KG per pallet)


Free existing samples for checking dimension and quality

Production time:

15-40 days based on different quantity after receive the prepayment

Shipping Port:

Xihu (West Lake) Dis.g,ZheJiang Port,  ZheJiang   Port, China.

Payment Terms:





SIZE (mm)

Out Diameter (mm)

Length (mm)

Pitch (mm)

N.W    (KG)



Approvals/ Certificate









































































1.Strong Reba Parallel thread couplers Introduction

Rebar Upsetting Couplers is used in Upsetting technology is a parallel-thread mechanical splicing system designed for the connection of 16mm to 40mm reinforcing bars. This is easy installation rebar couplers which can make sure the quick connection for rebar. We mainly produce it by higher strength raw material 40CR

It is designed and manufactured in compliance with China standard of JGJ107-2571, UK standard of BS8110, USA standard of ACI318, VN standard of TCVN8163 and other international standards.

2.Features and advantages for this high efficiency and cost saving system:

a.No reduction of the bar cross section area and bar break feature.

b.Fast installation no need torque wrench

c.Assemble easily by visual inspection

d.It is Standard ISO parallel Metric Thread designs.

e.This mechanical connections are quicker, safer and mover convenient ways than lap splicing or welding splicing.

3.Working Steps

a.Cutting the rebar end to make it flat

b.Enlarge the rebar diameter by cold upsetting

c.Making the parallel thread by cutting

b.Connect the rebars and make sure the barbreak

4.Technical Data

a.Applicable Standards: JGJ107-2571, UK standard of BS8110, USA standard of ACI318, VN standard of TCVN8163 and other international standards.

b.Raw material

Couplers are produced by the raw material of 40Cr, correspond to international standards of JIS: SCr440, ASTM: 5140, ISO: 41Cr4.

Chemical composition: C:0.37~0.44    Si:0.17~0.37   Mn:0.50~0.80   Cr:0.80~1.10 Ni:≤0.30  P:≤0.035  S:≤0.035  Cu:≤0.30

Mechanical Properties: Yield strength≥ 785MPa, Tensile Strength: ≥980MPa.

5.Technical Data

a.Applicable Standards: JGJ107-2571, UK standard of BS8110, USA standard of ACI318, VN standard of TCVN8163 and other international standards.

b.Raw material

Couplers are produced by the raw material of 40Cr, correspond to international standards of JIS: SCr440, ASTM: 5140, ISO: 41Cr4.

Chemical composition: C:0.37~0.44    Si:0.17~0.37   Mn:0.50~0.80   Cr:0.80~1.10 Ni:≤0.30  P:≤0.035  S:≤0.035  Cu:≤0.30

Mechanical Properties: Yield strength≥ 785MPa, Tensile Strength: ≥980MPa.


Company Profile

Packaging & Shipping


1. Q: Are you a trading company or manufacturer?

    A: We are an original equipment manufacturer.

2. Q: How long is your delivery time?

    A: It is according to the model and quantity.

        Generally, it is 3-5 days if the products are in stock.

        It will be 15-30 days if you want to customize the products

3. Q: What are your terms of payment?

    A: We accept T/T, Western Union, Money Gram, PayPal, Alibaba Escrow, etc.

        Payment<=USD 5000, 100% in advance.

        Payment>=USD 5000, 30% T/T in advance, balance before shipment.

 4. Q: Do you provide samples? Is it free or extra?

A: Yes, we could offer the sample for free charge, but clients do not need to pay the cost of freight.

Connection: Flange
Head Code: Round
Thread Distribution: Internal Thread
Surface: Polish
Material: Carbon Steel
Technics: Forged
US$ 0.2/Piece
1 Piece(Min.Order)

Request Sample


Types of Couplings

A coupling is a device that connects two shafts and transmits power from one to the other. Its main purpose is to join two pieces of rotating equipment. It also allows for some degree of misalignment or end movement. Here are a few examples of coupling types: Beam coupling, Flexible coupling, Magnetic coupling, and Shaft coupling.

Beam coupling

Beam couplings are used to couple motors and other devices. They are available in several types, including flexible, slit, and rigid beam couplings. Each has unique properties and characteristics. These couplings are best for applications requiring a high level of precision and long life. They are also a practical solution for the connection of stepping and servo motors with screw rods.
Beam couplings are usually made of stainless steel or aluminum alloy, and feature spiral and parallel cut designs. Multiple cuts allow the coupling to accommodate multiple beams and improve angular and parallel misalignment tolerances. Additionally, beam couplings are comparatively cheaper than other types of rotary joints, and they require minimal maintenance.
The materials of a beam coupling should be considered early in the specification process. They are typically made of aluminum or stainless steel, but they can also be manufactured from Delrin, titanium, and other engineering grade materials. Beam couplings are often available in multiple sizes to fit specific shaft diameters.
Beam couplings are a key component of motion control systems. They provide excellent characteristics when used properly, and they are a popular choice for many applications. A thorough understanding of each type of coupling will help to prevent coupling failure and enhance system performance. Therefore, it is important to choose the right coupling for your application.
Various types of beam couplings have unique advantages and disadvantages. The FCR/FSR design has two sets of three beams. It is available in both metric and inch shaft sizes. The FCR/FSR couplings are ideal for light-duty power transmission applications. A metric shaft is more suitable for these applications, while an inch shaft is preferred for heavier duty applications.
Two types of beam couplings are available from Ruland. The Ruland Flexible beam coupling has a multi-helical cut design that offers a greater flexibility than commodity beam couplings. This design allows for higher torque capabilities while minimizing wind-up. In addition, it is also more durable than its commodity counterparts.

Flexible coupling

A flexible coupling is a versatile mechanical connection that allows for the easy coupling of two moving parts. The design of these couplings allows for a variety of stiffness levels and can address a variety of problems, such as torsional vibrations or critical speed. However, there are a number of tradeoffs associated with flexible couplings.
One of the biggest issues is the installation of the coupling, which requires stretching. This problem can be exacerbated by cold temperatures. In such a case, it is vital to install the coupling properly. Using a gear clamp is one of the most important steps in a successful installation. A gear clamp will keep the coupling in place and prevent it from leaking.
Another common type of flexible coupling is the gear coupling. These couplings are composed of two hubs with crowned external gear teeth that mesh with two internally splined flanged sleeves. The massive size of the teeth makes them resemble gears. Gear couplings offer good torque characteristics but require periodic lubrication. These couplings can also be expensive and have a limited number of applications.
Another type of flexible coupling is the SDP/SI helical coupling. These couplings can accommodate axial motion, angular misalignment, and parallel offset. This design incorporates a spiral pattern that makes them flexible. These couplings are available in stainless steel and aluminum.
A flexible coupling has a wide range of applications. Generally, it is used to connect two rotating pieces of equipment. Depending on its design, it can be used to join two pieces of machinery that move in different directions. This type of coupling is a type of elastomeric coupling, which has elastic properties.
There are many types of flexible couplings available for different types of applications. The purpose of a flexible coupling is to transmit rotational power from one shaft to another. It is also useful for transmitting torque. However, it is important to note that not all flexible couplings are created equally. Make sure to use a reputable brand for your coupling needs. It will ensure a reliable connection.
The simplest and most commonly used type of flexible coupling is the grid coupling. This type of coupling uses two hubs with slotted surfaces. The steel grid is allowed to slide along these slots, which gives it the ability to flex. The only limitation of this type of coupling is that it can only tolerate a 1/3 degree misalignment. It can transmit torques up to 3,656 Nm.

Magnetic coupling

Magnetic coupling is a technique used to transfer torque from one shaft to another using a magnetic field. It is the most common type of coupling used in machinery. It is highly effective when transferring torque from a rotating motor to a rotating shaft. Magnetic couplings can handle high torques and high speeds.
Magnetic coupling is described by the energy difference between a high-spin state and a broken symmetry state, with the former being the energy of a true singlet state. In single-determinant theories, this energy difference is called the Kij. Usually, the broken-symmetry state is a state with two interacting local high-spin centers.
The magnetic coupling device is regarded as a qualitative leap in the reaction still industry. It has solved a number of problems that had plagued the industry, including flammability, explosiveness, and leakage. Magnetic couplings are a great solution for many applications. The chemical and pharmaceutical industries use them for various processes, including reaction stills.
Magnetic couplings are a good choice for harsh environments and for tight spaces. Their enclosed design keeps them fluid and dust-proof. They are also corrosion-resistant. In addition, magnetic couplings are more affordable than mechanical couplings, especially in areas where access is restricted. They are also popular for testing and temporary installations.
Another use for magnetic coupling is in touch screens. While touch screens use capacitive and resistive elements, magnetic coupling has found a cool new application in wireless charging. While the finger tracking on touch screens may seem like a boley job, the process is very sensitive. The devices that use wireless charging need to have very large coils that are locked into resonant magnetic coupling.
Magnetic couplings also help reduce hydraulic horsepower. They cushion starts and reduce alignment problems. They can also improve flow in oversized pumps. A magnetic coupling with an 8 percent air gap can reduce hydraulic HP by approximately 27 percent. In addition, they can be used in aggressive environments. They also help reduce repair costs.
Magnetic couplings are a great choice for pumps and propeller systems because they have the added advantage of being watertight and preventing shaft failure. These systems also have the benefit of not requiring rotating seals.

Shaft coupling

A shaft coupling joins two shafts and transmits rotational motion. Generally, shaft couplings allow for some degree of misalignment, but there are also torque limiters. Selecting the right coupling can save you time and money and prevent equipment downtime. Here are the main features to consider when purchasing a coupling for your application.
Shaft couplings should be easy to install and disassemble, transmit full power to the mated shaft, and reduce shock loads. A shaft coupling that does not have projecting parts should be used for machines that move or rotate at high speeds. Some types of shaft couplings are flexible while others are rigid.
Shaft couplings can be used in a variety of applications, including piping systems. They can be used to connect shafts that are misaligned and help maintain alignment. They can also be used for vibration dampening. Shaft couplings also allow shafts to be disconnected when necessary.
Shaft couplings can accommodate a certain amount of backlash, but this backlash must be well within the tolerance set by the system. Extremely high backlash can break the coupling and cause excessive wear and stress. In addition, excessive backlash can lead to erratic alignment readings. To avoid these issues, operators must reduce backlash to less than 2deg.
Shaft couplings are often referred to by different names. Some are referred to as “sliced” couplings while others are known as “slit” couplings. Both types offer high torque and torsional stiffness. These couplings are typically made from metals with various alloys, such as acetal, stainless steel, or titanium.
CZPT Pulley produces shaft couplings for a variety of applications. These products are used in high-power transmission systems. They have several advantages over friction couplings. In addition to minimizing wear, they don’t require lubrication. They are also capable of transmitting high torque and high speeds.
Another type of shaft coupling is the universal coupling. It is used to transmit power to multiple machines with different spindles. Its keyed receiving side and flanges allow it to transmit power from one machine to another.
China factory Threaded Rod Upset End Rebar Coupling Sleeve   with Best Sales China factory Threaded Rod Upset End Rebar Coupling Sleeve   with Best Sales
editor by CX 2023-05-26