Cycloidal pinwheel reducer can be a up-dated of innovative type transmissing machine designed with K-H-V less tooth engagement and the cycloidal pin wheel clenching device, which are trusted in drive and lowering of textile and dying, foodstuff, mining and metallurgy, Essential oil and chemical Market, cranes, task machinery etc and conveyors. various fields.
1. Gear is constructed of high durability low carbon alloy steel by carburizing and quenching. The hardness of tooth surface can reach HRC58-62. CNC grinding technology is followed for all with high precision, gears and good call performance
2. high transmission effectiveness: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable procedure and low noise;
4, compact structure, light-weight, long service life and high bearing potential;
5. convenient to assemble, check and disassemble.
Operation specifications and precautions
1.High modularization design: many equip with various electric motor or other power suggestions conveniently.Same machine type may equip with numerous power motor. It is easy to know the combination and
junction between every machine type.
2.Transmission ratio: fine division, wide scope. The combined equipment type may form very large transmission ratio, i.e. productivity suprisingly low rotary speed.
3.Form of unit installation: the positioning to be installed is not limited.
4.High strength, compact: the box body is constructed of large strength cast iron. Gear and equipment shaft adapts the gas carbonization, quenching and fine grinding process, which means bearing potential of unitvolume is large.
5.Long life: Beneath the condition of accurate type chosen (including choosing suited operation parameters)normal operation and maintenance, the life of main elements of speed reducer (except wearing parts) should not be significantly less than 20000 hours. The putting on parts include lubricating oil seal, bearing and essential oil.
6.Low noise: because main parts of speed reducer are processed, assembled and tested critically,therefore the noise of speed reducer is normally low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer
1. High quickness ratio and efficiency
Single stage transmission may reach to 1 1:87 of speed-down ratio and the efficiency is usually more than 90%. If make use of multi-speed drive the speed-down ratio is normally bigger.
Being adapted epicyclic transmission theory, the input and output shaft are in same axis center, it is compact.
3. Smooth and stable run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the machine part is stable, the vibration and noise is limited anyway content.
1. Large deceleration ratio
A high deceleration ratio of 1/30-1/320 can be acquired.The structure is simple, but it can understand high reduction ratio device.
2. Small gear clearance
The Travel, which meshes with ordinary gears and has minimal backlash, is essential to the controller business.
3. High precision
Multiple teeth are engaged simultaneously, and there are several gears engaged with 180 degree symmetry. Consequently, the impact of tooth pitch error and cumulative tooth pitch mistake on the rotation precision is relatively average, making the positioning precision and rotation precision reach an extremely high level.
4. Less parts, easy installation
The three basic pieces achieve a high deceleration ratio, plus they are all on the same axis, so the kit is easy to install and easy to shape.
5. Small in size and light in weight
Compared with the prior gear device, the volume is 1/3, the fat is 1/2, but can buy the same torque potential and reduction ratio, achieving small lightweight.
6 High torque capacity
Flexible wheel material USES particular steel with great fatigue strength.Not the same as ordinary transmission device, the number of teeth meshing accounts for close to 30% of the full total number of teeth. Additionally, it is in contact with the surface, in order that the pressure borne by each equipment is reduced and substantial torque ability can be obtained.
7 High efficiency
The sliding of gear meshing parts is quite small, which reduces the energy loss due to friction. Therefore, high decrease ratio can be achieved while maintaining high effectiveness, and miniaturization of generating motor can be realized.
8. Low noise
The gear meshing cycle rate is low, the transmission movements force balance, which means operation is quiet, and the vibration is quite small.
◆Large speed ratio and high efficiency single-stage transmission can perform a deceleration ratio of 1 1:87, and the efficiency is more than 90%. If multi-stage transmission can be used, the deceleration ratio will become larger.
◆Because planetary transmission theory is adopted, the type shaft and productivity shaft are on the same axis line, to ensure that the machine unit can get the smallest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is greater, and the mechanism of balancing machine parts makes the vibration and voice limited to a minimum.
◆Reliable use and extended service life because the primary parts are made from substantial carbon chromium steel, huge strength is definitely obtained by quenching (HRC58-62), and rolling friction can be used in some transmission contacts, therefore the service life is very long.
Cycloid reducer is usually a cycloid needle teeth meshing planetary transmission principle drive models, is a great transmission has many advantages, versatile, and will be both negative and positive operation.
•Big ratio, and high efficiency Smooth operation,
• low noise The utilization of reliable,
• extended life can reach 50000 hours
• Main parts high-carbon the Ming-steel after quenching treatment (HRC58-62),
• operation and connection with rolling friction, basically no wear, durable.
• Compact structure,
• little size Because the utilization of a planetary transmitting, the input shaft and the outcome shaft on the same axis, which makes the model to obtain the smallest possible size.
• Reasonable design, easy maintenance, and breakdown easily install,
• minimal number of parts together with straightforward lubrication, cycloid reducer trusted by an individual.
(1)Size above PL/PF120(including)high torque products adopt integral double wall world pinion carrier, enhance the output strength and precision.
(2).Hoop clamp coupling have five connection techniques suited to different application environments.
(3).Size above PL/PF120(incorporating)precision and high power integral inner gear housing, processed in a single station,which eradicate the cumulative error and assembling mistake of split type.Remove casting process;adopt hot of forging process, which will decrease the blank material defects.
(4).The meshing equipment adopt shaving procedure after carburizing and quenching,which simpler to make gear area smooth and high precision,reduce the temperature rising due to gear surface gluing and friction.
This series worm-gear reducer was crafted after RV worm microreducer, which have a complete norm, wide speed for selection, and several mounting positions. Its performance and mounting dime nsions conform the same sorts of foreign.
The combo of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square beautiful shape, shape, radiate heat efficiently, low noise and compact structure.
Very good sealing and adaptability.Its blend with T gear reducer and MB/MBN variator can meet all types of speed requirement.