China Good quality Giicl Type Cast Steel Curved Tooth CNC Customizable Forged Steel Flexible Jaw Drive Shaft Pipe Connector Drum Gear Coupling

Product Description

GIICL type Cast Steel Curved Tooth flexible drive shaft pipe connector Drum Gear Coupling 

 

This shaft coupling is applicable to connecting 2 horizontal line shafting of coaxial line It has a drumshaped teeth shaft coupling with angular orientation compensation on relative deviation of 2 shafts.Temperature of the operating environment is:-20 ~ +80C.The nominal transmitting torque is0.4-4500KN*m.

Gear Couplings
Features:
Improve the starting capability of electric motor, protect motor against overloading, damp shock, load fluctuation and torsional vibration, and balance and load distribution in case of multimotor drives.

Applications:

Belt conveyers, csraper conveyers, and conveyers of all kinds Bucket elevators, ball mills, hoisters, crushers, excavators, mixers, straighteners, cranes, etc.
We can just upload very limited information about our couplings products here, for more info, please do not hesitate to wrtie to us for catalog and related technic info….

 

 

A coupling can interchange and replacement with lovejoy coupling is a device used to connect 2 shafts together at their ends for the purpose of transmitting power. The primary purpose of couplings is to join 2 pieces of rotating equipment while permitting some degree of misalignment or end movement or both. In a more general context, a coupling can also be a mechanical device that serves to connect the ends of adjacent parts or objects. Couplings do not normally allow disconnection of shafts during operation, however there are torque limiting couplings which can slip or disconnect when some torque limit is exceeded. Selection, installation and maintenance of couplings can lead to reduced maintenance time and maintenance cost.

 

Our Company

Ever-power Group specialist in making all kinds of mechanical transmission and hydraulic transmission like: planetary gearboxes, worm reducers, in-line helical gear speed reducers, parallel shaft helical gear reducers, helical bevel reducers, helical worm gear reducers, agricultural gearboxes, tractor gearboxes, auto gearboxes, pto shafts, special reducer & related gear components and other related products, sprockets, hydraulic system, vacuum pumps, fluid coupling, gear racks, chains, timing pulleys, udl speed variators, v pulleys, hydraulic cylinder, gear pumps, screw air compressors, shaft collars low backlash worm reducers and so on. furthermore, we can produce customized variators, geared motors, electric motors and other hydraulic products according to customers’ drawings.
We provides a reliable grantee for the product’ s quality by advanced inspection and testing equipment. professional technical team, exquisite processing technology and strict control system. 
In recent years, the company has been developing rapidly by its rich experience in production, advanced management system, standardized management system, strong technical force. We always adhere the concept of survival by quality, and development by innovation in science and technology. 
Our Group is willing to work with you hand in hand and create brilliance together! 

Material available
Low carbon steel, C45, 20CrMnTi, 42CrMo, 40Cr, stainless steel. Can be adapted regarding customer requirements.

Surface treatment
Blacking, galvanization, chroming, electrophoresis, color painting, …

Heat treatment
High frequency quenching heat treatment, hardened teeth, carbonizing, nitride, …
 

Certifications

FAQ:

Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shippment.

Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.

If you have another question, please feel free to contact us.

Packing & Delivery

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

flexible gear coupling

Compensation for Axial, Angular, and Parallel Misalignments with Flexible Gear Couplings

Flexible gear couplings are known for their ability to accommodate various types of misalignments, including axial, angular, and parallel misalignments. Here’s how they compensate for each type:

  • Axial Misalignment: Axial misalignment occurs when the two shafts move closer or farther away from each other along the axis of rotation. Flexible gear couplings can absorb this type of misalignment through their flexible design, allowing the gear teeth to articulate and adjust to the axial movement without transmitting harmful forces to the connected equipment.
  • Angular Misalignment: Angular misalignment occurs when the two shafts are not collinear and form an angle with each other. Flexible gear couplings can accommodate angular misalignment by allowing the gear teeth to articulate and flex as the shafts are angularly displaced. This flexibility ensures that torque transmission remains smooth and minimizes stress on the coupling and connected equipment.
  • Parallel Misalignment: Parallel misalignment happens when the two shafts are offset horizontally while maintaining parallelism. Flexible gear couplings can handle this misalignment by utilizing their flexible elements to adjust to the lateral displacement of the shafts. The ability to compensate for parallel misalignment prevents excessive forces from being transmitted to the machinery, protecting it from damage.

Thanks to their design and material properties, flexible gear couplings provide a reliable solution for compensating for axial, angular, and parallel misalignments, making them suitable for a wide range of applications in various industries.

flexible gear coupling

Potential Causes of Failure in Flexible Gear Couplings and Prevention

Flexible gear couplings, like any mechanical component, may experience failures if not properly maintained or operated. Some potential causes of failure and ways to prevent them include:

  • Misalignment: Misalignment between the shafts can cause excessive stress on the coupling components, leading to failure. Regularly check and align the shafts to ensure they are properly aligned within specified tolerances.
  • Overloading: Exceeding the rated torque capacity of the coupling can result in premature failure. Always operate within the recommended torque limits and avoid sudden shock loads.
  • Poor Lubrication: Inadequate or improper lubrication can lead to increased friction, wear, and overheating. Follow the manufacturer’s guidelines for lubrication frequency and use the correct type of lubricant.
  • Corrosion: Exposure to corrosive environments can degrade the coupling’s material over time. Select couplings made from corrosion-resistant materials or use protective coatings when necessary.
  • Fatigue: Cyclic loading and continuous operation can cause fatigue failure in flexible gear couplings. Ensure the coupling is rated for the application’s required number of cycles and replace it if it shows signs of fatigue or wear.
  • Temperature: Operating the coupling at temperatures beyond its limits can lead to material degradation and reduced performance. Check the coupling’s temperature rating and operate within the specified range.

Regular inspection, maintenance, and adherence to the manufacturer’s guidelines are essential to prevent failure and ensure the reliable performance of flexible gear couplings. Implementing preventive measures can extend the couplings’ lifespan, minimize downtime, and enhance the overall efficiency of the machinery they are part of.

flexible gear coupling

Different Types of Flexible Gear Couplings and Their Applications

Flexible gear couplings are available in various designs, each suited for specific applications based on their features and capabilities. Some common types of flexible gear couplings and their applications include:

  • Full Gear Couplings: These couplings consist of two hubs with external gear teeth that mesh with an internal gear sleeve. They offer high torque capacity and are commonly used in heavy machinery, such as steel rolling mills, cranes, and conveyors.
  • Half Gear Couplings: Half gear couplings have one flexible half with internal gear teeth and one rigid half with external gear teeth. They are ideal for applications requiring torsional rigidity and misalignment compensation, such as pumps and compressors.
  • Nylon Sleeve Gear Couplings: These couplings have a nylon sleeve inserted between the gear teeth of the hubs and the internal sleeve. They are known for their vibration damping properties and are used in applications where noise reduction is essential, such as printing presses and textile machinery.
  • Chain Gear Couplings: Chain gear couplings use chains to transmit torque between the hubs. They are well-suited for high-speed and high-torque applications and can accommodate significant misalignment. These couplings find applications in turbines, generators, and large fans.
  • U-Joint Gear Couplings: These couplings have a universal joint-like mechanism that compensates for angular misalignment. They are commonly used in automotive drivetrains, agricultural equipment, and marine propulsion systems.
  • Spacer Gear Couplings: Spacer gear couplings have two hubs separated by a spacer that accommodates large misalignments. They are commonly used in paper mills, mining equipment, and other heavy machinery.

When selecting a flexible gear coupling, it is essential to consider the specific requirements of the application, including torque, speed, misalignment, and environmental conditions, to choose the most suitable type for optimal performance and longevity.

China Good quality Giicl Type Cast Steel Curved Tooth CNC Customizable Forged Steel Flexible Jaw Drive Shaft Pipe Connector Drum Gear Coupling  China Good quality Giicl Type Cast Steel Curved Tooth CNC Customizable Forged Steel Flexible Jaw Drive Shaft Pipe Connector Drum Gear Coupling
editor by CX 2024-04-22