Equipped with the zero leak bidirectional checking sole-noid valves, this electrical power unit is built for the operation of two independent circuits. Which are respectively to the main and subordinate platforms on the double scissors lift. Two cut-off valves are used for reducing the machine manually in situation of energy loss. If much more independent circuits are essential for the application please get hold of us for availability.
Remark: one. Please talk to our sales engineer for that different pump displacement, motor energy or tank capability.
two. CSA or UL licensed motors are available on request.
one. The AC motor is of S3 duty cycle, which can only get the job done intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
two. Clean all the hydraulic elements concerned before set up of the electrical power unit.
three. Viscosity on the oil shoud be 15~46 cst,plus the oil must be clean and totally free of impurities,N46 hydraulic oil is advised.
4. The energy unit ought to be mounted vertically.
five. Check the oil degree from the tank soon after the initial operating from the electrical power unit.
six. Oil modifying is needed immediately after the first a hundred operation hours,afterwards after every single 3000 hours.